MIDI2MV (MIDI to Master Volume)

control your windows master volume using a midi controller !

Control your Windows Audio Volume, Muting and Default Device
via MIDI Controller (knobs, faders, pads, keys) !
SysEx data supported.
Also, a MIDI Thru device/port can be set to make the incoming
MIDI data available for other applications.
see included readme file for further information.

If You like this software and use it a lot - FEEL FREE TO Donate !

- added support for SysEx data for MIDI Mapping
- mappable parameters : Volume, Mute (Toggle), Default device (Cycle)

- detect plugged in USB MIDI devices

- added MIDI Thru :
since in Windows a MIDI port can only be opened by one application at a time,
you can set MIDI Thru to a virtual MIDI port and use it as MIDI input
in another application
- added selectable OSD duration (in setup screen)

- fixed crash which happened when a USB device was plugged in and unplugged

- fixed crash which happened on systems using Realtek onboard sound
- detect if the default audio device was changed

- support for .NET 4.5 clients

- support for .NET 4.0 clients
- added optional OSD

- Reworked UI
- Remember selected MIDI-In device

- set hotkey combination from systray icon to dis-/enable MIDI input
- indicate state in systray icon
- check if default audio device has changed

- added "per Channel" mode which is useful for MIDI devices
which send multiple CC IDs with one controller

- autostart and "start minimized" added

- bugfixes

- initial release

  mVControl (MIDI Volume Control)

control your Audio Device Output/Input VOlumes by using a midi controller !

This tool allows you to "natively" control the output/input volumes
and mute-states of your installed Audio devices by using a
MIDI-controller or -key of your choice.
Autostart and start minimized supported.
Options are accessible from tray icon contextmenu.
see included readme file for further information.
requires .NET 4 and a MIDI-capable device.

If You like this software and use it a lot - please donate !
Even small amounts are highly appreciated !

- added volume normalization option

- check for missing root registry entry when storing settings

- release all MIDI devices when switching of MIDI input

- tab content scrolling

- initial release

  GLSL multishader Clock

A GLSL shaded clock

I build this one to display the current Date/Time on a wall using a Projector.
But it is also looking cool on the screen.
see included readme file for further information.
OpenGL 3.0 (or higher) required. (Should be already installed with your NVidIa /
ATI Graphics card drivers.

- initial release

  portable backup

backup / restore up to ten often used directories
to an external or internal harddrive.

if you modify or add data in specific direcories all the time,
you can define them in the tool and backup the data to a location
of your choice.
since the settings will be saved on the machine, you just need
to set them once.
the tool can run from an external hardrive via autorun.inf
which it will generate. see included readme file for further information.

- initial release

  ADFread frontend (for adfread by toni wilen)

use this batch frontend with adfread if you have a number of amiga disks to be transferred to your windows machine to ease the process.
you can use the .adf disk images with an emulator like winuae then.

since reading amiga disks sector-by-sector on pc takes some time,
the frontend supports overwrite protection of your already done diks images and
automatic numbering if you can not read the labeling due to their aGE :)

execute from the same folder as adsread.exe


THIS VBS SCRIPT creates a .BMX and its folder named by the current date (YYMMDD)
from a template setup bmx and loads it into buzz on request.
if executed multiple times it creates versions (_02.._xx) of the last EDITED bmx file
FOUND in the current folder (\YY\YYMMDD\YYMMDD_XX.BMX).
So it provides a way to organize your worktunes.

It comes in handy if you often create new Tracks from the same setup
and require alot of savestates.
But it can be used fOR ALL KINDS OF DOCUMENTS.

CONFIGURE FOLLOWING variables in the script to your setup:

1) bmxWorkDir = "Drive:\PATH\"
Which is the LOCATION where your bmx and folder will be created.
the workdir is organized LIKE follows : bmxWorkDir\YY\YYMMDD\YYMMDD_01.BMX

> E:\BUZZ\TRACKS\INWORK\11\110823\110823_01.bmx

2) bmxTemplateName = "xxxxxx.bmx"
Which is the name of your template/Setup bmx file.
THE template PATH = bmxWorkDir.

  SIMPLON III - BUZZ THEME (jeskola buzz build 1456 required)

this theme implements new funCtionalities to the buzz machineview and
due to its space-saving and slick design it is especially useful for notebook use.

added in V3.4
- adapted for new Fullscreen mode and window theming features
(Buzz build 1456+)

added in V3.3
- Custom quicknewmachinewindow (buzz build 1443+)

added in V3.2
- support for wireless effects (buzz build 1425+)
- context menu extensions
- Custom wavetable design
- Custom scrollbars/sliders and icons

added in V3.1
- MASTER VOLUME SLIDER changed to rotary DIAL
(< CTRL > + DRAG for more accuracy)

added in V3.0
- modified toolbar to fit on notebook screens with limited resolution
- smaller AND MORE SIMPLE machines for ADDITIONAL space in the machineview
- smaller machinewindows
- additional buttons do only show on mouseover to keep the view clean
- LEDs glow
- visual feedback (selection indicator, FADE IN/FADE OUT)
for machines MOSEOVER, LEDs, and buttons
- depending on the machinetype the button in the upper right corner
works as SOLO or BYPASS
- additionally the LED in MUTE and BYPASS mode turns grey and in SOLO mode red
- all other than the soloed machines show an passive LED

UNZIP into your buzz\themes folder.


this mod (based on buzz build 1384)
adds the Ability to hide or show the new horizontal sequencer view.
since it was requested several times on buzzchurch.COM.

Besides the default setting you can also use the keyboard shortcut < ctrl + H >
while on the sequencer view to temporarly HIDE/show it.

UNZIP "BuzzGUI.SequenceEditor.dll" into your buzz root folder.
You might wanna Backup the existing dll first.